Signs That Tell If Your Windshield Was Not Correctly Installed
The windshield is the essential part of the structural integrity of the car. The windshields not only acts as a protective shield for small rocks or dust but also saves you at the time of car rollover and severe collision. Getting a chip or split in your windshield is a frustrating problem. It is advised that you replace the windshield immediately, as the crack or chip can spread and cause more problems. If you have recently had your windshield replaced, how can you tell that the work done was done correctly? Unfortunately, poor technique and even utter carelessness during windshield replacement can lead to significant difficulties down the road. Be on the scene of a few tell-tale signs that your windshield replacement job poorly carried. If it stands installed improperly, then you should get it fixed by an auto glass repair Tulsa expert.
Installation by Only One Person
The windshield must always be repaired or replaced by an expert technician as it the most critical part of your vehicle, which needs extra supervision. It is better to get the windshield installed by two men experienced technicians to handle the glass and set the windshield for more accuracy and precision and ensure it is aligned up well before placing it to the frame. If you witness only one man installing it, there are often good a chance of it wasn’t done accurately by the technician.
Installers Weren’t Wearing Gloves
Installers must use gloves while fixing the windshield into the frame so that the oils do not transfer from the mechanic’s hand to the glass itself—the windshield covered with uterine, which helps in securing it in place. If oils do transfer from bare hands, it can break that urethane down, decreasing its ability to adhere and will result in leaks. So it is ideally essential that technicians should wear gloves which installation of the glass. If they do not do so, then it is time to get your windshield assessed to confirm that there aren’t any leaks in the auto glass.
Not Sure About the Source of Glass
Having your shield glass replaced with new glass straight away from your vehicle manufacturer is key to ensure a proper fit and long-lasting repair. Sadly, if you have no proof, glass is ordered directly from the car manufacturer; sometimes, installation services may use after-market glass to cut costs. Even worse, they may have taken your replacement auto glass from a trash yard. After-glass may not fit right in your windshield frame, which may result in damage and leaks. A reputable company of windshield replacement Tulsa will always be able to trace from the manufacturer to have a great fit.
Water from Your Windshield Spills
When you get your windshield replaced, you should always check whether it leaks or spills water. You should take your car for a car wash and keep a close eye on the edges where there are chances of water leakage. You can also consider taking your vehicle on a ride when it’s raining. If water gets on your car, this means the auto glass was not correctly installed and needs replacement by experts of auto glass Tulsa. Failure to do so will create leakage in the adhesive. This way, they can avoid leaks and other imperfections that can affect your driving experience.
Your Windshield Rattles
After you get a new windshield installed, it is always good to test it on the road—a faulty installation of windshield replacement results in gaps between the frame and the glass. A common sign of improper fitting of the windshield is the sudden appearance whooshing noise, especially at a moderately higher speed. What you are hearing is the sound you the wind getting in from the cracks where the windshield stands incorrectly installed. For the betterment of hearing, you can shut the AC, music, and windows. It can prove fatal if left neglected. The windshield repair Tulsa expert will help you to get the windshield installed correctly.
Auto Glass Looks Wavy
When you look at your auto glass in the sunlight, it should look smooth and unblemished. You might also notice slight distortion and blemishes or experience blurred vision while driving. These are also signs of low-quality auto glass. If any sort of wave or bumps seems to be on the surface, it means there was an installation error or sure sign of a quality issue. It is another indication that your installer did not get your windshield directly from the manufacturer.
Drove Car within an Hour of Installation
The adhesive urethane used in fixing the auto glass takes time to settle. Windshield replacement takes 3-4 hours to get thoroughly restored. Driving the vehicle immediately after installing a shield is not safe. Driving the vehicle before the adhesive gets fixed can shift the auto glass from its place. Even the smallest bump on the road can cause shifting in the auto glass. Therefore, if you drove your car within the first few hours after the new auto glass gets fixed. Thus, it’s almost confirmed that the glass assembling isn’t correct.
What to Do If Your Auto Glass Was Poorly Installed?
When technicians are inexperienced and do not follow security protocols. Moreover, disaster is waiting to happen. If any of these problems implement in your car. You have enough reason to suspect that your glass stands installed incorrectly. The next immediate step you should take is to take your vehicle. Thus, to the reputable windshield replacement Tulsa company for honest and best suggestions. Expert technicians can provide you with a thorough assessment and make any recommendations. Thus, for repairs or total replacement of your windshield.
Windshield Replacement Tulsa
Having an improper windshield glass replacement installed is critical. Moreover, when it comes to your safety on the road, as well as the safety of your passengers. If you suspect your auto glass stands are improperly installed or need windshield replacement, contact us at Glassworks Auto Glass. We are the most credible and trusted company; we assure you the best windshield replacement and repair in Tulsa, OK.
