Get windshield repair Collinsville today. Imagine a situation that required you to park your car near a construction site. The event resulted in a tiny massacre as a huge chunk of masonry fell on your vehicle leaving a gaping hole in its windshield.

This is the time when you will have to find out whether getting the damaged windshield repaired would be enough or you’ll need to contact a reputable auto glass repair company for windshield replacement in Tulsa. The information provided in the section below would make the job a lot easier for you.

Repair vs. Replace

Most cracks and chips on a vehicle’s windshield can be repaired. However, you must consider certain factors before you rule out the possibilities of a windshield replacement. The factors are as follows:

Depth and Size: It shouldn’t be difficult for the repair person to repair chips that are around 1 inch in diameter. The same can be said about cracks that are around 3 inches long. Traditionally, it was believed that if a crack is bigger than a standard dollar bill, you shouldn’t try to get it repaired. Such cracks cannot be repaired satisfactorily.

Indeed, recent years have seen the advent of a series of new technologies and some of them can repair longer cracks and wider chips. If you are hiring technicians from a reputable company doing auto glass repair in Tulsa, you can expect them even to fix 17-18-inch-long cracks.


Windshield cracks can be of different types. Some of them can be repaired more easily than others. Examples of cracks that are easier to repair include Star Break, Partial Bullseye, Bulls Eye, Crack Chip, Pit, Ding, etc.

According to experts, the mechanic hired by you should be able to fix any crack or chip. That you can cover with a quarter. However, if there are multiple cracks, it would be wise to opt for a replacement. Get windshield repair Collinsville today.


You must understand that on certain occasions, even an experienced repair person may fail. Prevent minor discolorations, unevenness, or mistiness around the repaired area of the windshield. So, if you are trying to fix cracks or chips along the line of sight of the motorist, go for Tulsa windshield replacement right away. Repairing those damaged parts will decrease the clarity of the glass and thereby reduce your driver’s visibility.

Technicians should consider all prospective motorists when deciding the driver’s line of sight above the vehicle’s steering wheel. Doing so is crucial as the measurements vary depending on the driver’s height.

You should consider replacing the windshield even if the crack or chip has taken place. Extremely close to the edge of the windshield. Such damages spoil the windshield’s integrity and interfere with its strength. The bonding of the glass to the metal frame around it also attenuates. So, if you don’t want to compromise the safety of passengers traveling in the vehicle, you should hire a company known to replace auto glass in Tulsa OK.

Consider going for a replacement also if the mechanic hired by you fails to see the chip or crack clearly. When the damage is not fully visible, it’s almost impossible to fix it.

About Windshield Repairs

If you hire a proficient technician, he shouldn’t take more than 30 minutes to repair a crack or a chip. On rare occasions when the crack or chip is too big. The time taken by the repair person can go up to 40 minutes. Extra time might be needed if the repair work involves some additional steps. This primarily happens when the crack or chip is deep and is filled with dust and dirt. Get windshield repair Collinsville today.

During an auto glass repair in Tulsa OK, the technician injects a curable (transparent) resin into the damaged windshield’s outer layer. This helps in restoring the glass’s integrity and also improves its appearance. Once the resin is cured, the treated area is polished and made smooth. This repair process stops the chips or cracks from spreading and ensures that the damage doesn’t become more serious.

If the chip or crack is slanted or deep, it might have caused major damage. To the intermediate PVB (polyvinyl butyral) layer of the glass. To manage such damages, the technician typically drills the area. This enlarges the gaps and make them more even and smoother. This allows the injected resin to reach the PVB layer easily. To ensure that this process of windshield repair in Tulsa is successful, any debris and dust accumulated inside the chip/crack should be meticulously removed.

About Windshield Replacement

If your car’s windshield has developed a crack that’s longer than afoot. Or a chip that is more than 2 inches wide, you should not look for any other option. Besides getting the glass replaced. The replacement process of these glasses usually involves four steps. Get windshield repair Collinsville today.

The technician would first use canvas or other similar materials to cover the area surrounding the windshield. Next, he will cut the windshield from its edges and remove it. The technician would also make sure that the glues and seals from the old, damaged windshield are also removed. The next step of windshield replacement in Tulsa OK would involve spreading a primer along the frame’s inside.

Finally, the new windshield is positioned and fitted into the frame. And the edges of the newly installed glass get coated using a polyurethane-based adhesive sealer. Get windshield repair Collinsville today.

Windshield Repair Collinsville

If you are looking for the most trusted service providers for repairing or replacing auto glass in Tulsa, you shouldn’t look beyond Glass Works Auto Glass. They are doing business for almost three decades. And are known for offering the most impeccable auto glass repair services in this region. Get windshield repair Collinsville today.