There are a few signs that you might need windshield repair or ADAS recalibration Tulsa:
- Visible cracks or chips: This is the most obvious sign of damage. Even small cracks or chips can grow larger over time, so it’s important to get them repaired as soon as possible.
- Pitting: This is a rough, hazy appearance on the windshield that can be caused by sand or other debris. Pitting can scatter light and make it difficult to see, especially at night.
- Cracks in the driver’s line of sight: Any crack that is in the area directly in front of the driver is a safety hazard and should be repaired immediately.
- Large cracks or chips: Cracks that are longer than a quarter inch or chips that are larger than the size of a nickel typically need to be repaired by a professional.
- Multiple cracks or chips: If you have multiple cracks or chips in your windshield, it may be more cost-effective to replace the windshield altogether.
If you notice any of these signs, it’s important to get your windshield repaired as soon as possible. Early repair can help prevent the damage from getting worse and can also help to maintain the structural integrity of your windshield. You might also need ADAS recalibration Tulsa after a windshield repair or windshield replacement.
Here are some signs that your windshield needs a complete replacement, rather than just a repair:
- Extensive cracks or chips: While small chips can be repaired, large cracks (especially those longer than a dollar bill) or multiple chips scattered across the windshield compromise its structural integrity. Repairing such extensive damage is impractical and may not be safe.
- Large cracks in the driver’s direct line of sight: Any crack that significantly hinders your clear view of the road is a major safety concern. A complete replacement is necessary to restore safe visibility.
- Spiderweb cracks: These branching cracks radiate outward from a point of impact and can significantly obstruct your vision. Due to the complex nature of these cracks, a replacement is usually the best course of action.
- Deep scratches: Deep scratches can not only be unsightly but can also weaken the windshield and make it more prone to cracking or shattering. If scratches are severe and impede visibility, replacement might be necessary.
- Delamination: This occurs when the layers of the windshield separate. It can cause haziness and reduce visibility, especially at night. A delaminated windshield needs to be replaced.
- Failed windshield inspection: During a car inspection, significant cracks, chips, or other damage that obstruct your view or compromise the windshield’s integrity can lead to a failing grade. To pass inspection, you’ll likely need a replacement.
Remember, it’s always best to consult a professional for a proper assessment of your windshield damage. They can advise you on whether a repair is sufficient or if a complete replacement is necessary.
Following a windshield repair or replacement, you may need ADAS recalibration to get your vehicle in tip-top shape.
You might need ADAS calibration Tulsa if your car has experienced any of the following:
- Windshield replacement: ADAS systems rely on sensors mounted on or behind the windshield. Even a minor change in the windshield’s position can affect how these sensors function, making recalibration necessary.
- Collision: A collision, even a minor one, can misalign ADAS components like cameras or radar. Recalibration ensures they function properly.
- Changes in ride height: Some ADAS systems rely on information about the vehicle’s ride height. If you replace your tires or suspension components that alter ride height, recalibration might be required.
- Illuminated ADAS warning lights: Your car might have warning lights specifically for ADAS recalibration Tulsa malfunctions. If these lights are on or flashing, it’s a good sign you need calibration.
There are two main types of ADAS calibration:
- Static calibration: This is typically done in a workshop setting with specialized tools. The car remains stationary while technicians use targets and diagnostic equipment to align the ADAS sensors.
- Dynamic calibration: This involves driving the car on a specific route while the ADAS system collects data and realigns itself.
The specific calibration method required depends on your car’s make and model, as well as the nature of the repairs or adjustments performed. It’s always best to consult your car’s owner’s manual or a certified repair shop to determine if and what type of ADAS recalibration Tulsa is necessary for your vehicle.
There isn’t a set schedule for windshield repair or ADAS recalibration Tulsa. Here’s a breakdown for each:
- Windshield repair: This depends entirely on the type and extent of damage. Minor chips or cracks might not require immediate repair, but it’s wise to address them soon to prevent them from growing into larger cracks.
- ADAS recalibration: This typically isn’t a routine maintenance item. It’s mainly needed after specific events that can affect sensor positioning or alignment, such as:
- Windshield replacement: Even a minor change in windshield placement can disrupt ADAS systems. Recalibration is necessary after any windshield replacement.
- Certain repairs or adjustments: In some cases, repairs to suspension components or replacing tires can alter a vehicle’s ride height, which might necessitate recalibration for some ADAS recalibration Tulsa systems.
- Collisions: Even a minor bump can misalign ADAS components.
If you’re unsure if you need ADAS recalibration Tulsa after a repair or incident, consult your car’s owner’s manual or a certified repair shop. They can advise you based on your specific vehicle and situation. Call or text 918.610.9967 to schedule an appointment today.
